USED Danelectro Danelectro / 59M NOS+ Ice Gray [20]

The Dan Electro "59 M NOS+" has an impressive and unique body shape. The body material is made of semi-hollow spec Masonite.
Equipped with two 2-NOS+ lipstick pickups.
This model features a Badass-type bridge for improved sound and convenience.
This model features stack type controls.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The body side tape was peeled off at the time of arrival. The tape was too shrinky to be applied as it was, so a plastic plate was cut out at the strap pin on the heel side and held down from the top for repair.
Overall, there are some signs of use such as minor scratches and small dents.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： Korea
Weight ： 3.02kg
Serial ： 081825

Truss Rod: No problem, confirmed to be 60 degrees left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.6mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|22.2mm
SCALE|635mm (25")
RADIUS|381mm (15")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.6mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
22.2mm

Scale
635mm (25")

RADIUS
381mm (15")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment