USED Fender Japan Fender / ST72-58US Olympic White [20]

The CURRENT SERIES '72 Stratocaster was introduced in 1987 with the concept of making a CBS Fender with the finest Japanese technology.
After going through various models and specifications, the ST72-58US was released at the end of 1997 with "made in the USA" vintage pickups.
70's specs: large head, bullet truss rod, 2 string guides, and 3-point tilt-adjustable neck.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and fret grated after our arrival, so it is in good playing condition.

Arm is missing.
The pick guard is dirty and the back plate is cracked.
Overall, there are some minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: 2002-2004
Truss rod: There is enough room.
Fret: 60-70%.
Attachment ： Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 3.50kg
Serial ： CIJ Q026994

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|25.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
25.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment