YAMAHA / PACIFICA PROFESSIONAL PACP12DTB / Desert Burst [Outlet] Yamaha [80]

1. Deeper top and back contours for a greater sense of unity when playing
The back contour has been deepened to fit more comfortably when holding the guitar, and the top contour (the part where the elbow rests) has been rounded instead of straight contours to improve the fit against the arm.

2. Slim C shape for modern play
The Slim C neck shape was adopted to accommodate a wide range of styles, from lead to backing, based on feedback from many players in Japan and the U.S. The "Standard Plus" has a 42mm neck, and the "Standard Plus" has a 42mm neck. The "Standard Plus" features a 42.00mm TUSQ nut. The roll-off processing on the side of the fingerboard is highly precise, and the neck thickness is set at 20.00mm thick at the 1st fret position and 22.4mm thick at the 12th fret position. Both low chords and power chords are stress-free and highly playable.

Compound Radius is used for the Professional Series
Compound radius is a high-precision conical fingerboard finish that gradually increases the radius of the fingerboard from low to high position (gradual radius = round at low position and flatter toward high position). This design also prevents choking in the high position, and is recommended for those who set the string height low.

3. Hi-Fi pickup "Reflectone" completed in cooperation with Rupert Neve Design
This pickup was developed and manufactured by Yamaha in collaboration with Rupert Neve Design, a company founded by Rupert Neve, who has produced many famous pro audio pickups. By using Alnico V magnets and researching and developing the number of turns, winding method, and height of the pole piece from scratch, we have created an extremely well-balanced pickup that combines the power of the low frequency range with "sparkling" high frequency range. 4.

4. acoustic analysis technology by Acoustic Design
Acoustic Design" is a design process that utilizes Yamaha's unique acoustic analysis and 3D modeling. Special processing is used to emphasize the mid-range frequencies by "coupled vibration reinforcement" of the body and neck, and to reproduce tight, clear bass tones by adjusting the low-frequency vibration frequency.

I.R.A. (Initial Response Acceleration)
I.R.A. is a technology that eliminates stress between the paint and wood by applying vibrations specific to the guitar to the finished guitar. The guitar is made to look as if it has been played for many years.

<Main specifications
Country of Origin Made in Japan
Body ALDER 2PCS (center)
Neck MAPLE / CUSTOM TINTED SATIN FINISH
Fingerboard ROSEWOOD
SCALE 648mm
RADIUS Compound radius / 254-355.6mm(10"-14")
Neck Profile SLIM C SHAPE
Neck Thickness 1st Fret 20.0mm / 12th Fret 22.4mm
Fret MEDIUM / STAINLESS STEEL
Rod WHEEL TRUSS ROD
Nut Graph Tech TUSQ 42.0mm
Pickups [Reflectone]
Controls Volume & Tone / High Pass Vol & Coil Tap / 5way SW
Bridge Gotoh 510T-FE1 (2 point support, 10.8mm pitch between strings)
Tuner Gotoh SG381 MG-T (Locking type)
Others I.R.A. (Initial Response Acceleration) treatment
Case Hard case

Specs

Country of OriginMade in Japan

Body ALDER 2PCS(Center)

Neck MAPLE / CUSTOM TINTED SATIN FINISH

Fingerboard ROSEWOOD

Scale648mm(common)

RadiusCompound radius / 254-355.6mm(10"-14")

Neck ProfileSLIM C SHAPE

Neck Thickness 1st Fret 20.0mm / 12th Fret 22.4mm

Fret MEDIUM / STAINLESS STEEL

Rod WHEEL TRUSS ROD

Nut Graph Tech TUSQ 42.0mm

Pickups [Reflectone] Collaborated P.U. with YAMAHA x Rupert Neve Designs / S-S-H

ControlsVolume & Tone / High Pass Vol & Coil Tap / 5-way SW

BridgeGotoh 510T-FE1 (2-point support, 10.8mm pitch between strings)

Tuner Gotoh SG381 MG-T(Locking type)

Other I.R.A. (Initial Response Acceleration) treatment

CaseHard case