商品情報にスキップ
1 16

USED FENDER MEXICO / STANDARD STRATOCASTER Black [03]

Serial Number : MZ5100815

[SN MZ5100815] USED FENDER MEXICO / STANDARD STRATOCASTER Black [03]

Item Code: 03-2800003063808
Condition: USED
Store: [03] ochanomizu

通常価格 ¥84,901 JPY
通常価格 セール価格 ¥84,901 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
FENDER MEXICO STANDARD STRATOCASTER in used condition.
Cracks on the neck pocket, PG discoloration, fingerboard partially peeled off, and some minor signs of age.
Arm is missing.

Serial number|MZ5100815
Year of manufacture
Country of manufacture|Mexico
Case|- Soft case
Accessories|-
Weight|3.7kg
Truss Rod|Caution: I have checked the rod to 60 degrees left and right, and there is no problem (not much left)
Fretboard: Still good for cutting, but the frets are low.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|22.4mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Other|-
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MZ5100815
Country of manufacture: Mexico
Case: Soft case
Weight: 3.7kg
Truss Rod: Note: I have checked the rod to 60 degrees to the left and right and it is fine (not much left)
Fretboard: With some notes, still can be cut, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 22.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
MZ5100815

Country of manufacture
Mexico

Case
Soft case

Weight
3.7kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
22.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
FENDER MEXICO STANDARD STRATOCASTERが中古で入荷。
ネックポケットにクラック。PG変色や指板一部剥がれ、細かな経年変化含め使用感は多めです。
アーム欠品。

シリアルナンバー|MZ5100815
製造年|-
製造国|メキシコ
ケース|ソフトケース
付属品|-
重量|3.7kg
トラスロッド|注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り|注意点ありまだ切削に耐えるがフレット低め
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|42.1mm
ネック厚(1フレット付近)|21.2mm
ネック厚(12フレット付近)|22.4mm
スケール|648mm (25.5")
RADIUS|184mm (7.25")
セットアップ時の弦|ERNIE BALL 2223 / .009-.042 set
変更箇所|-
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整
その他|-
商品ランク: B:かなり、傷&使用感はあるが、通常使用する用途において問題なし

シリアルナンバー: MZ5100815
製造国: メキシコ
ケース: ソフトケース
重量: 3.7kg
トラスロッド: 注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り: 注意点ありまだ切削に耐えるがフレット低め
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 42.1mm
ネック厚1フレット付近: 21.2mm
ネック厚12フレット付近: 22.4mm
スケール: 648mm (25.5")
RADIUS: 184mm (7.25")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B:かなり、傷&使用感はあるが、通常使用する用途において問題なし

12ヶ月

シリアルナンバー
MZ5100815

製造国
メキシコ

ケース
ソフトケース

重量
3.7kg

トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)

フレット残り
注意点ありまだ切削に耐えるがフレット低め

弦高低音弦側
12フレット上 2.0mm

弦高高音弦側
12フレット上 1.5mm

ナット幅
42.1mm

ネック厚1フレット付近
21.2mm

ネック厚12フレット付近
22.4mm

スケール
648mm (25.5")

RADIUS
184mm (7.25")

セットアップ時の弦
ERNIE BALL 2223 / .009-.042 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4