商品情報にスキップ
1 16

USED PAUL REED SMITH / 2019 SE Custom 24 Amethyst [03]

Serial Number : CTI B47150

[SN CTI B47150] USED PAUL REED SMITH / 2019 SE Custom 24 Amethyst [03]

Item Code: 03-2800003142213
Condition: USED
Store: [03] ochanomizu

通常価格 ¥93,600 JPY
通常価格 セール価格 ¥93,600 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
The used 2019, cost-effective SE Custom 24 Amethyst is in stock!

* From the manufacturer's website below
The SE series of guitars, which inherits the sound quality of PRS guitars but at an affordable price point, has established a solid position in the market share of the same price range since its introduction in 2001, and has grown to become one of PRS's main lineups.

The SE Custom 24, a favorite of many musicians, features a mahogany back, maple top body, wide thin-curved maple neck, rosewood fingerboard, bird inlays, and a PRS-designed tremolo bridge.

It is equipped with an 85/15 "S" with volume, push/pull type tone control, and a 3-way blade pickup selector to provide a clear and beautiful sound from low to high notes.

The SE Custom 24 is a classic yet modern, highly durable, and versatile tone.

Condition.
The condition of the guitar has only minor scuffs and scratches, and has not been used much. The neck, frets, truss rod, and all other playing-related conditions are in perfect condition.
The neck, frets, truss rod, etc. are all in good playing condition.

Product rank: B+: Some scratches, but no problem in normal use.
Item rank: B+: Some scratches, but no problem in normal use.

Serial number: CTI B47150
Year of manufacture: 2019
Country of manufacture: Indonesia
Case: gig bag (not genuine)
Includes: arm and wrench
Weight: 3.26kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 23.2mm
SCALE: 635mm (25")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
CTI B47150

Year of manufacture
2019

Country of Manufacture
Indonesia

Case.
Gig bag (non-genuine)

Accessories
Arm, wrench

Weight
3.26kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
23.2mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
2019年製、コストパフォーマンスに優れた「SE Custom 24 Amethyst」が中古で入荷!

* 以下メーカーサイトより
PRSとしてのサウンドクオリティを継承しつつも、手頃な価格帯でのギターを実現したSEシリーズは、2001年の登場以来、同価格帯のマーケットシェアに於ける確固たる地位を築き上げ、PRSの主力ラインナップのひとつまでに成長を遂げました。

数多くのミュージシャンから愛用されているSE Custom 24は、マホガニー・バック、メイプル・トップのボディ、Wide Thinカーブのメイプル・ネック、ローズウッド指板、バード・インレイを合わせ、PRSデザインのトレモロ・ブリッジを装備。

ボリューム、プッシュ/プル・タイプのトーン・コントロール、3ウェイ・ブレード・ピックアップ・セレクターを備えた85/15 “S”を搭載し、低音から高音まで明瞭で美しいサウンドが得られます。

SE Custom 24は、クラシカルな中にモダンさを兼ね備え、高い耐久性、多彩なトーンを兼ね備えた1本です。

コンディション
細かな擦り傷が見受けられる程度で使用感の少ないコンディションです。ネック、フレット・トラスロッド等、演奏に関わるコンディション全て問題ございません。
また入荷時、当社リペアセンターにて全体調整とフレットすり合わせをしておりますので、安心してお使いいただけます。

商品ランク:B+  :多少傷はあるが通常使用する用途において問題なし
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: CTI B47150
製造年: 2019
製造国: インドネシア
ケース: ギグバッグ(非純正)
付属品: アーム・レンチ
重量: 3.26kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 43.4mm
ネック厚1フレット付近: 20.9mm
ネック厚12フレット付近: 23.2mm
スケール: 635mm (25")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
CTI B47150

製造年
2019

製造国
インドネシア

ケース
ギグバッグ(非純正)

付属品
アーム・レンチ

重量
3.26kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
問題なし充分なフレット高さあり

弦高低音弦側
12フレット上 2.0mm

弦高高音弦側
12フレット上 1.5mm

ナット幅
43.4mm

ネック厚1フレット付近
20.9mm

ネック厚12フレット付近
23.2mm

スケール
635mm (25")

RADIUS
241mm (9.5")

セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4