USED GIBSON USA / Les Paul Custom Modified [03]

We are pleased to announce the arrival of a 2002 Gibson USA/Les Paul Custom MOD!

The Les Paul Custom specs are a royal roadmap with a maple top, mahogany back body, one-piece mahogany neck, and fingerboard made of pitch-black ebony.
The neck shape is a "rounded" specification with a moderate thickness, providing an easy-to-grip grip.
The parts have been replaced, and the pegs, bridge, tailpiece, and strap pins have been replaced.
The jack, jack plate, toggle switch washer, and toggle switch back panel screws may have been replaced or stripped of their plating.
Also, there are two screw holes left on the body where the pickguard was attached. (The pickguard is missing.) The pickups have also been replaced from the original ones.

The pickups have been replaced from the original ones, and "EMG85" in the front and "EMG81" in the rear are installed respectively.
The wiring has also been modified for active use, and the pot capacitors have been replaced and a 9V battery has been installed.
The fat and powerful sound of the active pickups is a characteristic of this guitar.

As for the condition, there are many scratches, dents, and cracks in the paint, in addition to the replacement and modification points as mentioned above.
In addition, the number lock on the hard case that comes with the instrument is damaged.
Although the overall condition and modifications give the impression of use, this is a Les Paul Custom with a different sound from the usual Les Paul Custom.

This is a Les Paul Custom that has been gaining popularity in recent years, so please consider this an opportunity to own one!
Truss Rod: Slightly loose in the tightening direction.
Neck Condition: Slightly twisted, no problem for playability
Fret: About 70-80% remaining
Case: Genuine hard case (key part is broken)
Accessories: None
Serial number: 01962393
Weight: 4.49 kg

* Due to the nature of this item, we will refrain from showing or moving this item to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 01962393
Country of manufacture: U.S.A.
Case: Hard Case
Weight: 4.46kg
Truss Rod: No problem, rod checked up to 60 degrees left and right, no problem
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, pot replacement, mortise and tenon adjustment, and gouge removal.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
01962393

Country of manufacture
U.S.A.

Case
Hard Case

Weight
4.46kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, pot replacement, mortise and tenon adjustment, and gouge removal