USED RICKENBACKER / Limited Edition 4001CS / Chris Squire Signature [03]

RICKENBACKER Limited Edition 4001CS / Chris Squire Signature is in stock used.

Rickenbacker / 4001CS, the signature model of Chris Squire, the bassist of the rock band "Yes," which can be called a milestone of progressive music, is now in stock!

Only 1000 of this model were made between 1991 and 2000 based on his 1964 4001, and the cream-colored body is reminiscent of his own.

The truss rod has only a little remaining in the tightening direction, but the neck is in good condition.
There are some dents and paint cracks on the body, and the white parts of the pickguard and truss rod cover are peeling.

There is a discrepancy between the serial number on the jack plate and the certificate that comes with the instrument, but we believe this was an error when the instrument was sold new, as it matches the serial number on the Warranty Registration Card from that time.

This is a very rare model! Please take this opportunity to try it out!

The paint is cracked at the joints, and there are scratches, dings, some paint peeling, and some dirt, but we have replaced the strings with new ones after receiving this item, and our repair department has cleaned, maintained, and set up each part.
We also offer a 1-year warranty so that you can use it for a long time after purchase with peace of mind.

* Due to the nature of the product, we will not be able to provide guidance or transfer the product to other stores within Ishibashi Gakki. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Hard Case
Weight: 4.19kg
Truss Rods: 20° remaining on the tightening side of both rods
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 3.4mm above 12th fret
String height on treble string side: 3.0mm above the 12th fret
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret edge treatment, rod cover twist correction

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Case
Hard case

Weight
4.19kg

Truss Rods
Approx. 20° remaining on both rods on the tightening side

Remaining frets
No problem, sufficient fret height

String Height Low String Side
3.4mm above the 12th fret

String height on treble string side
3.0mm above the 12th fret

Strings in setup
D'Addario EXL165 / .045-.105 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret edge treatment, rod cover twist correction