USED JAMES TYLER / Studio Elite HD Limited Royal Blue Shmear [03]

The classic James Tyler "Studio Elite HD," made in 2020, is now in stock in pre-owned condition!

JAMES TYLER started with the "Studio Elite" series of guitars designed to support the diverse music scene of the 80's, followed by the rise of the "Classic Style" in the 90's, and then the "Retro Series", "HD Series", and "Mongoose Series" in the 2000's. The "Studio Elite HD" is a classic model of the James Tyler lineup, and is in great demand by the music scene. The "Retro Series," "HD Series," "Mongoose Series," and many other models have been introduced to the world. The Studio Elite HD from JAMES TYLER, the pinnacle of component guitars, is now in stock!

Body, Neck, Fingerboard
The body is made of carefully selected swamp ash. The body is made of carefully selected swamp ash, which produces a fat, glossy, and clear sound that is unique to Tyler. The neck and fingerboard are made of quarter-sawn maple.

Extra Thin '59" neck shape is used. The satin finish is smooth and silky, and the thin grip makes it a perfect match for any playing style.

Hardware part
The bridge is a Gotoh "G2TS" with a pressed saddle with Tyler's engraving on the base plate, which is trusted by many high-end brands. 2-point support ensures smooth operation and the pressed saddle provides a sense of overtones.

The pegs are Hipshot locking type for stable tuning and quick string changes.

Pickups
The pickups are JTS5500, JTS5500, and SUPER, starting with the neck pickup.

The Super is a pickup with the impression of a modern rock single shot. It has a strong low end, and the midrange push is more restrained than that of the Shark. On the other hand, the high frequency range has more presence than the Shark, making it a high-gain pickup. It also responds to the volume of the guitar. The sound is usable in any position, and is designed to be used in any genre of playing without any problem.

The JTS5500 is a single-coil pickup designed specifically for S/S/H. It uses the same magnet and wire as the original 5250 pickup set, which was developed based on James Tyler's original idea, but it is compatible with the 500k volume pot and produces a balanced S/S/H sound. H sound output.

Controls
The controls are simple enough to be acceptable to many players, with a master volume, 5-way selector, master tone, and mid boost.
Although this model has a very simple control structure, the 5-way switch has no usable or unusable notes, and all positions can be used to produce superb sounds, which is the strength of James Tyler guitars.

JAMES TYLER guitars are made from carefully selected materials and are made with great care, and only a few hundred are made each year worldwide, making them a rare commodity. Although expensive, once you touch one of these guitars, you will forget the time and concentrate on playing. We hope you will experience its sound.

Condition
The guitar is in beautiful condition with little signs of use. The neck, frets, truss rod, and all other playing-related conditions are in perfect condition.
The instrument has been fully adjusted and cleaned at our repair center when it arrived, so you can use it with no worries.

* Due to the nature of this item, we will not be able to show or move it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for more information.

Item rank: A: Beautiful

Serial number: 20035
Year of manufacture: 2020
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Arm, Wrench, Spec Sheet
Weight: 3.31kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction, strap pin screw replacement (end side)

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
A: Beautiful

12 months old

Serial No.
20035

Year of manufacture
2020

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
Arm, wrench, spec sheet

Weight
3.31kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction, strap pin screw replacement (end side)