USED GIBSON USA / ES-335 Dot Cherry [03]

We are pleased to announce the arrival of a 1981 Gibson USA/ES-335 Dot Cherry!

This is a vintage reissue of an early 1960s model.
It has a maple body, 3-piece mahogany neck, and rosewood fingerboard.
The neck shape is a C-shape with a good thickness, which is typical of the 1960s, and the grip is comfortable to the hand.

The guitar is equipped with Grover rotomatic type pegs, Tune-O-Matic bridge, and stop tailpiece.

Two original "engraved numbered PAF" pickups are installed.
After 1981, the model with "Engraved Numbered PAF" is rare because of the transition to "Tim Show PAF" and other pickups.
This pickup is designed to push out the characteristics of the instrument, so the sound with a sense of air that is unique to semi-acoustic guitars can be produced.

Front Pickup: 2737842(engraved)329581(printed)
Rear Pickup: 2737842(Marked)330581(Printed)

The condition of this guitar has scratches, dents, paint cracks, and parts are dull.
Also, there are some paint peeling on the back of the neck near the f-hole.
The strap pins have been replaced from the original ones on both the top and bottom, and the hard case has been replaced with a non-genuine hard case.
The guitar is in good playing condition, with almost 70% of the frets remaining.

This is a valuable first reissue model!
The paint on the back of the neck shows that it has been played for a long time!
The paint on the back of the neck shows that it has been played a lot!
Truss Rod: Slightly loose/tightening direction
Neck Condition: No problem
Fret: 60-70%.
Case: Non-authentic hard case
Accessories: Keys
Serial number:81191033
Weight: 3.84?

* Due to the nature of this product, we will not be able to show or move it to other stores within Ishibashi Gakki. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: 81191033
Case: Hard Case
Weight: 3.84kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem.
Fretboard: note that the frets are low and can still be cut.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.7mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modification: Strap pin
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or other blemishes not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.