USED GRETSCH / 6122 Country Gentleman 1968 [03]

GRETSCH 6122 Country Gentleman 1968 is in stock used.
It is believed to be 1968 from the serial number specification.
The master volume pot has been replaced with a CTS 500KB. Several back panel set screws are missing, non-original hard case, and the binding is believed to have been restored.
Mute section sponge missing.
Scratches and scratches on the body and the joints of the two-piece neck can be seen. The body has some scratches and scuffs, and the joints of the two-piece neck are visible.
We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial number: 118171
Year of manufacture: 1968
Country of manufacture: USA
Case: Hard Case
Accessories: Keys
Weight: 3.81kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
118171

Year of manufacture
1968

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Keys

Weight
3.81kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment