USED GIBSON CUSTOM / Japan Limited Run 1974 Les Paul Custom VOS [03]

Gbson Custom Shop /Japan Limited Run 1974 Les Paul Custom VOS Silver Burst made in 2023 is now in stock!
Based on the data of Randy Rhoads '74 Les Paul Custom released in 2010, this model was ordered only for Japan!

It has a maple top, mahogany and maple pancake back body, and a 3-piece mahogany neck with a 14-degree head angle and volute. Ebony fingerboard.
The neck shape is a "Small D Profile" with a thin neck and a grip that is suitable for technical playing.
In addition to the 14-degree head angle with volute, multi-binding, block inlays, and gold parts. The engraving on the back of the head, small position marks, and the no i-dot logo have been faithfully reproduced down to the smallest details.

Two original "Super '74 Humbucker" pickups are installed.
The pickups are designed with the sound of the time in mind, and have a dynamic sound that cannot be experienced anywhere else with its sharp rise and rich overtones.

As for the condition, there are many scratches, dents, rust and dirt on the parts other than the dull paint and parts due to the original "VOS".
Also, the paint has peeled off to the wood on the top of the head and the end of the body.
The case has some exterior peeling, but the case is original including the other accessories.
The case is in good condition and has been used, but there are no problems with the playing surface.

This is a rare "Silver Burst" color 1974 Les Paul Custom that was ordered only for Japan!
The silver and black burst and gold parts give it a more luxurious look!
Please consider this opportunity!
Truss Rod: Slightly roomy in the tightening direction / roomy in the loosening direction
Neck Condition: No problem
Fret: about 80%.
Case: Genuine hard case
Accessories: Certificate, manual, tags, toggle switch back panel, etc.
Serial number: 74003823
Weight: 4.37 kg

Item rank: B: Fairly scratched and used, but no problem in normal use.

Serial number: 74003823
Country of manufacture: USA
Case: Hard Case

Weight: 4.37 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 25.6mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gouge removal

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
74003823

Country of manufacture
U.S.A.

Case
Hard Case

Accessories

Weight
4.37kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.4mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
25.6mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gouge removal