USED Paul Reed Smith (PRS) / 2013 DGT Livingston Lemondrop [03]

Used 2013 David Grissom signature model "DGT" is in stock!

* From the manufacturer's website below
The DGT (David Grissom Trem) is the culmination of over 20 years of collaboration between Paul Reed Smith and David Grissom. This model is based on the McCarty, but with the original neck shape and slightly higher frets, and is equipped with specially tuned pickups. The DGT humbucker pickups that produce this vintage sound were the result of Paul and David's extensive hours of A/B testing of more than 40 sets of prototypes. The control section has two volume and push/pull tone controls, and the fat, glossy single-coil sound that can be achieved by coil tapping is one of the main attractions of this model.

The two guitarists are experts in vintage guitars and have created a vintage sound that has been brought back to life in the modern age.
Condition
There are two dents on the outer circumference of the body back, a paint chip on the tip of the head, and other minor dents and dull parts.

The neck, frets, and truss rod are all in good playing condition.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 13 201490
Year of manufacture: 2013
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Tag, Arm, Wrench, Manual
Weight: 3.73kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 23.8mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 13 201490

Year of manufacture 2013

Country of manufacture USA

CaseHard case (genuine)

AccessoriesTag, arm, wrench, manual

Weight 3.73kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainderNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.4mm

Neck thickness near the 1st fret: 21.4mm

Neck thickness near 12th fret 23.8mm

SCALE 635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment