USED FENDER USA / Stratocaster Maple Fingerboard Black 1978 [03]

Fender USA / Stratocaster Maple Fingerboard Black 1978 in used condition!

Vintage Fender USA 1978 Black on Black, Flame Maple Neck Stratocaster. It has a big presence!

This is one of the heaviest Stratos of this era, but at only 3.67kg, it is lightweight!
The 3-point neck plate, bullet rod, F-key, and 5-way selector switch are the royal specs and looks of the late 70's, and the flame maple neck is just stunning! The pickups have a low output, and the treble range is well forward, which is great for fast cutting.

All three pickups are gray bobbin with '78 stamps, vinyl wiring, pots are all from '78, and the condenser is a round ceramic 0.05M.
The only replacement parts are the jack, nut, and imo screws.

The only parts that have been replaced are the jack, nut, and immovable screw.
The body paint is burnt and melted in some spots, and there are two large spots on the back of the head where the paint has peeled off and the wood is exposed. There are many dents and scratches on the body, head, and neck, and the side of the neck is discolored with paint peeling from being played.

Fenders from the 70's are said to have a lot of individual differences, but this one is the jackpot! This guitar looks and sounds great, and it radiates the best aspects of the era, so we look forward to hearing from you.
B: Fairly scratched and used, but no problems in normal use.
Truss Rod: No problem, checked up to 60 degrees left and right.
Neck condition: No problem
Fretboard: Sufficient fret height
Case: Fender Deluxe Gigbag (non-genuine, current)
Accessories: Arm, 2 springs, possibly original jack and nut, and some screws.
Serial Number: S893421
Weight (kg): 3.67

* Due to the nature of this product, we are unable to move it between stores.

Product Rank: B: Fairly scratched & used, but no problem in normal use.

Serial number: S893421
Year of manufacture: 1978
Case: Soft case
Weight: 3.67kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.9mm
Neck thickness near 1st fret: 22.62mm
Neck thickness near 12th fret: 24.77mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs: Item rank B: Fairly scratched and damaged.

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number S893421

Year of manufacture 1978

CaseSoft case

Weight 3.67kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 40.9mm

Neck thickness near 1st fret 22.62mm

Neck thickness near 12th fret: 24.77mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment