USED GIBSON / SJ-200 Standard [03]

The King of the Flat Tops, the GIBSON SJ-200 STANDARD is now in stock. It continues to reign supreme in popularity.
It was manufactured in Bozeman, Montana, USA in 2017.
The top is made of Sitka spruce and the back and sides are made of flame maple. It shows various expressions depending on the angle of lighting.

The SJ-200 is beautifully finished with high-quality maple.
It is characterized by a clear, bright nuance with a clearly separated, thick bass range. The dry but warm sound is worthy of the name The King of the Flat Top.
The string height has been adjusted and the nut has been replaced. The nut is made of ox bone. Pickups are ANTHEM by L.R. BAGGS. There is a small ding on the back of the neck and a bump in the paint on the center strip of the neck. The pickguard surface is peeling.
There are many scratches and dings throughout, and the guitar has a lot of use, but it plays and sounds great.

A GIBSON gig case is included.

Item rank: B
Truss rod: There is more than 60 degrees of leeway in the direction of tightening.
Neck condition: Good
Fret: Enough
Case: Gig case

Item Rank: B: Fairly scratched & used, but no problems in normal use

Serial Number: 12436043
Country of manufacture: USA
Case: Soft case
Weight: 2.37kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.7mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 28.2mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.