USED GRETSCH / G6119-1962HT [03]

GRETSCH/G6119-1962HT is now in stock in used condition!
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.

The fretboard has been adjusted to match the frets, so it is in good playing condition and can be used without any problems.

* Due to the nature of this item, we are unable to move it from one store to another.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: JT05011074
Case: Hard Case
Weight: 3.11kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Residuals: note that the frets are low and can still be milled.
String Height Low String Side: 2.1mm above the 12th fret
String height on treble string side: 1.8mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and wiring correction. Switch contacts polished and greased.

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the instrument. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number JT05011074

Case Hard Case

Weight 3.11kg

No truss rod problem.

Fret remainderNote that the frets are low and can still withstand cutting.

String height: 2.1mm above the 12th fret on the bass string side

1.8mm above the 12th fret on the treble string side

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, wiring correction. Switch contacts polished and greased