USED Paul Reed Smith (PRS) / 2014 Custom 22 Lefty 10top Violet Pattern Neck [03]

Used 2014 Custom 22 10Top, a lefty version with a small production run, is now in stock!

Custom 22
The Custom 22 is one of the most popular PRS models with a richer and more musical sound than the Custom 24 due to the two less frets than the Custom 24 and the difference in the built-in and position of the PU. This is one of the classic PRS models.

Body, neck, and fingerboard
The body is a royal combination of flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Indian rosewood.

Neck Shape
The neck shape is the "Pattern" shape, which is used on McCarty and other guitars.

Pickups
Originally, "57/08" pickups were installed, but they have been replaced with "85/15" pickups.
The smooth bass range and clear, wide treble range give the guitar a rich and brilliant sound that can be used in a wide range of genres, especially rock.

Selector etc.
The 3-way toggle switch + coil tap specification allows for more intuitive playing.

The PRS has been loved by guitarists of various genres for many years, and you will be able to experience its maximum performance in various fields such as live performances, sessions, and recordings.
Condition
The paint is faded on the top of the body, and there is some white paint on the neck joint, cutaway, back of the neck, and the head (both sides). There is also some paint chipping on the tip of the head.
There are other minor scratches and dents scattered around, and the parts are dull and have a sense of use.

The pickups, bridge, volume pot, condenser, and strap pins have been replaced.

The neck, frets, truss rod, etc. are all in good playing condition.
The guitar has been fully adjusted and cleaned at our repair center when it arrived, so you can use it with confidence.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 14 208585
Year of manufacture: 2014
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Tags, Manual
Weight: 3.51kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 23.3mm
Neck thickness near 12th fret: 24.2mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Pickups, bridge, volume pot, condenser, strap pins
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other: 85/15 Pickups

* This is a used instrument and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* Please note that the truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 14 208585

Year of manufacture 2014

Country of manufacture USA

CaseHard case (genuine)

AccessoriesTag, manual

Weight 3.51kg

No truss rod problem, rod checked up to 60 degrees left and right, no problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.9mm

Neck thickness near 1st fret 23.3mm

Neck thickness near 12th fret 24.2mm

SCALE 635mm (25")

RADIUS254mm (10")

Strings in setup ERNIE BALL 2221 / .010-.046 set

Modified partsPickups, bridge, volume pot, condenser, strap pin

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment

Other 85/15 Pickups