USED MARTIN / OMCPA1 [03]

Martin/OMCPA1 2010 with electronics and Fishman AURA is now in stock!

This model "OMCPA-1" incorporates a cutaway in a conventional OM body.
Main specifications are: all solid spruce top, solid Indian rosewood sideback, select hardwood neck, ebony fingerboard, bridge, slightly thinner C-shape with a nut width of about 44.45mm, and 25.4" (approx. 645.16mm) long scale. The specifications are similar to the long scale of 25.4" (approx. 645.16mm).
Equipped with Fishman F-1 Aura Pickup System. It can be used as an electric acoustic guitar.

The condition of the guitar has some dents, scratches, and dull metal parts, and there is a sense of age and use commensurate with its age.
There is a slight bulge below the top bridge.
The neck is currently straight, and there is no high rise. The truss rod has been checked to 60 degrees left and right, but there is not much left.
The frets are approximately 60% full. The string height is 2.6mm on the 6th string and 2.0mm on the 1st string at the 12th fret.
There are paint cracks on both sides of the bridge.
There are no electrical problems, and the output is good.
A genuine hard case is included.

The transparent and deep sound of this guitar is typical of Martin, and can be used for a wide range of fingerstyle and strokes.
In addition to the ease of handling that only the OM size can offer, the cutaway design makes it easy to play in the high position, making it an effective instrument for both live performances and recording.

Please consider it as soon as possible!

Top: Spruce
Side & Back: Indian Rosewood
Neck：Select Hardwood
Fingerboard & Bridge: Ebony
Condition: B+: There are dents, scratches, and dull metal parts.
Serial number: 1431955
Neck Condition: In good condition, truss rod has been checked up to 60 degrees left and right (not much left).
Fretboard: The frets have been adjusted and are not heavily uneven, and are approximately 60% high.
Case and accessories: Genuine hard case

Country of manufacture: U.S.A.
Year of manufacture: 2010
Repair and parts replacement history: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Strings at setup: D'Addario EJ-16 / .012-.053 set

Item rank: B+: Some scratches, but no problems in normal use

Serial number: 1431955
Year of manufacture: 2010
Country of manufacture: USA
Case: Hard Case
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.6mm above 12th fret
String height on treble string side: 2.0mm above the 12th fret
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.