USED GIBSON / 1973–74 SG Standard Cherry [03]

The 1973-74 SG Standard is now in stock!
Featuring a mahogany body, a 3-piece mahogany neck, a high-quality ebony fingerboard, a small pickguard, escutcheon-mounted pickups, and a large rectangular bridge, this SG Standard—from the transitional period between model changes—has arrived.

It features a narrow neck with a grip of just the right thickness, making it easy to play even for those with smaller hands.
It’s equipped with Super Humbucker pickups. These high-output pickups—known as “Tar Backs” because their backs are filled with black resin—are characterized by a sweet, resonant tone and a wide dynamic range.

Originally finished in Cherry Red, the color has faded over time to a shade closer to brown.
While the degree of fading varies slightly between the body top and back, the original color is still visible beneath the pickguard and under the escutcheon—a detail that fans will appreciate.

Overall, there are scratches, dents, playing wear, and buckle marks consistent with its age. There are marks on either side of the headstock’s taper that appear to be from a stand, and the clear coat on the back of the neck and the elbow area has chipped away in places, causing some areas to lose their luster.
In addition, rust and tarnish are visible on the hardware.

The pots and wiring have been replaced; the tailpiece has been replaced with a GOTHO model; the control knobs have been replaced; and the screws for the pickups, escutcheons, and back panel have each been replaced in some areas.
Inside the hard case, there is peeling from the body to the neck compartment, exposing the wood in some areas.

Overall, the instrument shows signs of use commensurate with its age, but considering its vintage, it appears to be in good condition.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: 132554
Year of Manufacture: 1973–74
Country of Manufacture: United States
Case: Hard case
Accessories: 2 original screws
Weight: 3.23 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 40.4 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 24.8 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Potentiometers, wiring, tailpiece, knobs, some screws
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, screw replacement
Other: Peeling inside the case; wood exposed

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.

* Due to the nature of this product, we are unable to transfer it between stores; we appreciate your understanding.