USED FENDER MADE IN JAPAN / Heritage '60s Stratocaster with Rosewood Fingerboard, 3-Color Sunburst [03]

FENDER MADE IN JAPAN / Heritage 60s Stratocaster Now in Stock (Used)!
The Heritage series was developed under the supervision of Mark Kendrick, a master builder at the Fender Custom Shop.
Featuring a top lacquer finish and vintage specifications, this guitar is designed to capture the classic Fender sound and playability of yesteryear!
Featuring an alder body, rosewood fingerboard, and a 7.25-inch fingerboard radius—faithfully recreating the characteristics of a 1960s Stratocaster—this guitar lets you fully enjoy the classic Fender tone with its warm single-coil sound and rich response.

There are some playing scratches on the pickguard, dents near the elbow contour and jack plate, and a few scuffs on the top and back of the body; however, the guitar is in good overall condition and plays perfectly.

After this item arrived at our store, we replaced the strings with new ones and had our repair department clean, maintain, and set up all components.

Accessories: Original soft case, tremolo arm, wrench, and manuals

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: JD20009403
Year of Manufacture: 2020
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm, wrench, manuals
Weight: 3.48 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 24.9 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.