USED Fender / Classic 50s Telecaster Special Vitage Natural 2016 [05]

The 2016 Japan Exclusive Series Classic 50s Telecaster Special is now in stock.

This 50s style Telecaster features an ash body and maple neck/fingerboard.
Equipped with humbuckers on the front and a massive SPL bridge with octave adjustment for each string.
It is a so-called K.R specification model.

There are some signs of use such as scratches and dents, but it has been checked and adjusted as a whole by a professional repair person after arrival, and is in good playing condition.

SPEC

Body Material：Ash
Body Finish: Polyester
Neck：Maple, Slim "C
Neck Finish: Gloss Polyester
Scale Length：25.5" (64.77cm)
Fingerboard: Maple, 7.25" Radius (184.1 mm)
Frets：21, Vintage-Style
Position Inlays: Black Dot
Nut(Material/Width): Synthetic Bone, 1.650" (42 mm)
Tuning Machines: Gotoh Cast/Sealed

Bridge：6-Saddle String-Through-Body Tele with Block Steel Saddles
Pickguard：1-Ply Black
Pickups：Dragster C (Neck), Vintage-Style Single-Coil Tele (Bridge)
Pickup Switching: 3-Position
Controls: Master Volume, Master Tone
Control Knobs: Knurled Dome
Hardware Finish : Chrome
Color : Vintage Natural

Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: JD16011644
Year of manufacture: 2016
Country of manufacture: Japan
Case: Original gig bag
Weight: 3.95kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement x 2

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD16011644

Year of manufacture2016

Country of manufacture Japan

CaseGenuine gig bag

Weight 3.95kg

No truss rod problemsNo problems when rod is checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.4mm

Neck thickness near 1st fret 22.5mm

Neck thickness near 12th fret 24.1mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement x 2