USED Fender USA / 1989 American Vintage 62 Stratocaster MOD [05]

We are pleased to announce the arrival of a 1989 Fender American Vintage 62 Stratocaster.

Both the neck and body are stamped 1989, and the body has been refinished. There is paint in the neck pocket that appears to be the original color, so it was probably a sunburst or black color.

All electrical components have been changed, including selector, pots, capacitors, etc. The inside of the pickup cavities have been coated with conductive paint.
Wiring is master volume, front PU-Tone, and rear PU-Tone.
Also, there are pickguard marks on the neck end, and we believe the pickguard has been changed from the original.

Overall, there is a strong sense of use, but the playing condition is good.

* There is writing on the back of the head.

Item Rank: B: Fairly, scratches & signs of use, but no problems in normal use applications.

Serial Number: V041817
Year of manufacture: 1989
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.59kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.9mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.8mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modified parts: Fretboard, pegs, pickups, pots, capacitors, pickguard, wiring, body finish, conductive treatment inside cavity
Repair and Maintenance: Fret adjustment, cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Other: Neck Date : XXX 16 1989
Body Date : FEB 25 1989

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please note that there are scratches, dents, etc. that are difficult to be seen in the photos.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs: Item rank B: Fairly scratched and damaged.

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number V041817

Year of manufacture1989

Country of manufacture: U.S.A.

CaseHard case

AccessoriesArm

Weight3.59kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.9mm

Neck thickness near 1st fret 20.5mm

Neck thickness 22.8mm near 12th fret

SCALE 648mm (25.5")

RADIUS241mm (9.5")

Strings in setup ERNIE BALL 2223 / .009-.042 set

Modified partsFretboard, pegs, pickups, pots, capacitor, pickguard, wiring, body finish, conductive treatment inside cavity

Repair/Maintenance partsFret adjustment, cleaning, string change, rod adjustment, octave adjustment, string height adjustment

OthersNeck Date : XXX 16 1989

Body Date : FEB 25 1989