USED PAUL REED SMITH / Standard 24 2005 [05]

We’ve just received a used 2005 PRS Standard 24!

It features the traditional all-mahogany construction passed down from the pre-factory era.
The fingerboard features a 10R radius with a gentle curve that makes bending notes easy, and is crafted from warm-toned rosewood.

It’s equipped with an “HFS” pickup at the bridge and a “Vintage Bass” pickup at the neck.
Combining high output with a warm sound, they produce a vintage tone that’s both powerful and deep.

The neck features a Pattern Regular profile.
Its easy-to-grip C-shaped neck profile makes techniques like the “shake hand” particularly easy to execute.

Since this model was manufactured in 2005 to commemorate the 20th anniversary of PRS, although it has a gloss finish, the truss rod is marked with “20th” and the fingerboard features “Birds in Flight” inlays.

In terms of past replacements, the frets and two set screws on the saddle have been replaced.

While it shows some signs of use, after purchase, our repair center will perform
we perform a full adjustment, cleaning, and string replacement at our repair center, so you can purchase this guitar with confidence.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: 5 101881
Year of Manufacture: 2005
Country of Manufacture: United States
Case: Soft case
Accessories: Arm
Weight: 3.41 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.8 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 635 mm (25")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Replaced 2 saddle set screws
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, replacement of 2 saddle set screws

* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements regarding the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.