USED FENDER USA / New American Vintage 65 Jazzmaster 3-Color Sunburst [06]

The American Vintage series has been refined in 2012, and even the shape, knobs, and screws are closer to the vintage style.
Round laminated rosewood fingerboard with binding and dot position marks.
The transition logo, "switch hat" control knob, and other features faithfully capture the characteristics of the era.
There are many dents on the body, minor scratches, paint chips under the joint plate and on the body side and 6th string cutaway, as well as some cracks in the paint.
The instrument has been cleaned, adjusted, and fretted, so it can be used without any playing problems.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V1200732
Case: Hard Case
Accessories: manual, arms, straps, etc.
Weight: 3.50kg
Truss Rod: No problem, rod checked up to 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V1200732

Case
Hard case

Accessories
Manual, arms, straps, etc.

Weight
3.50kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.9mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing