USED FENDER USA / American Standard Stratocaster Sunburst [06]

American Standard Series Stratocaster with traditional yet modern specs.
The accompanying tag and neck stamp indicate that this guitar was made in 1988.
It has an alder body, rosewood fingerboard, satin-finished maple neck, 2-point tremolo support, and 22 frets for playability.
Controls include master volume, front tone, center and rear TBX controls.
There are many dents and scratches on the body, pickguard has some scratches from playing, and there are some paint damages on the contours of the back of the body and the horn on the 6th string side.
The strap pins have been replaced with lock pins, but the strap side is missing.
The fretboard has been cleaned, adjusted, and the frets have been adjusted after arrival, so there are no playing problems.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: E477250
Case: Hard Case
Accessories: Arm
Weight: 3.54kg
Truss Rod: Tightened up to 60°.
Fret Residuals: Still good for cutting, but low frets.
String Height Low String Side: 2.1mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 22.6mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, replacement of 4 pickup tubes, neck ironing, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
E477250

Case
Hard case

Accessories
Arm

Weight
3.54kg

Truss Rod
Up to 60° on the tightening side

Fret Remaining
Note: Fretboard can still withstand cutting, but the frets are low.

String Height Low String Side
2.1mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
22.6mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, replacement of 4 pickup tubes, neck ironing, and rubbing