USED FENDER USA / 1978-1979 Stratocaster Sunburst [06]

Fender 1978-1979 Stratocaster Sunburst is now in stock!
It has an ash body and maple one-piece neck, and weighs only 3.26kg.
It is equipped with 78 serial PU and 5-point PU selector.

PU STAMP/201978, POT DATE/7812, pickguard has been replaced.
TONE pot has been replaced, jack has been replaced, imo screws have been replaced, and PG screw holes have been repaired.
Arm missing, paint damage overall, cigarette burn marks on head, dents and paint peeling, body back sticker marks, and other damage.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: S900597
Year of manufacture: 1979
Country of manufacture: USA
Case: Hard Case (non-original Fender)
Weight: 3.26kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Residuals: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.59mm
Neck thickness near 1st fret: 22.06mm
Neck thickness near 12th fret: 24.34mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, pot replacement, jack replacement, imo screw replacement, PG screw hole repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup and may change due to climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
S900597

Year of manufacture
1979

Country of manufacture
U.S.A.

Case
Hard case (non-original Fender)

Weight
3.26kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.59mm

Neck thickness near 1st fret
22.06mm

Neck thickness near 12th fret
24.34mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, pot replacement, jack replacement, imo screw replacement, PG screw hole repair