USED GIBSON USA / Midtown Standard with Bigsby Faded Red [06]

A used 2012, USA-made Midtown Standard is in stock.
Maple top, chambered mahogany back body, mahogany neck, and rosewood fingerboard.
The chambered body has good resonance, and the resonance and airiness of the f-holes will probably be useful in jazz and blues genres.
There are some paint chips around the head from the use of clip tuners and other minor scratches.
There are also some minor dents and scratches on the top of the body, and the back of the body has many scratches and dents including buckle marks, giving the impression that it has been played a lot.
The body back has many scratches and dings, including scratches on the buckle, giving the impression that it has been played. The guitar has been adjusted and cleaned at our repair center, so there are no problems with the playing surface.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 107920305
Year of manufacture: 2012
Country of manufacture: USA
Case: Hard Case
Weight: 3.93kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 22.9mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
107920305

Year of manufacture
2012

Country of manufacture
U.S.A.

Case
Hard case

Weight
3.93kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
22.9mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment