USED FENDER JAPAN / PB62 -53 3TS [06]

FENDER JAPAN PB62-53 3TS Used in stock now!
Manufactured by Fujigen from 1993 to 1994.
Basswood body, Maple neck, Rose fingerboard.
PB-VINTAGE pickups are made in Japan.
There is a wood chip on the head top, a paint chip on the neck joint, and deep dents on the body top.
Also, there are scratches and dents on the cutaway.
The cutaway is in player's condition with many scratches, dings, and dull metal parts.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: N067551
Country of manufacture: Japan
Case: Hard Case
Weight: 3.865kg
Truss Rod: At the limit of the rod with a note of caution, the neck is currently in good condition.
Fretboard Height: No problem, fretboard is high enough.
String Height Bass String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.46mm
Neck thickness near 1st fret: 20.72mm
Neck thickness near 12th fret: 24.76mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
N067551

Country of manufacture
Japan

Case
Hard case

Weight
3.865kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
42.46mm

Neck Thickness near 1st Fret
20.72mm

Neck thickness near 12th fret
24.76mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing