USED FENDER / Modern Player Starcaster Aged Cherry Burst [06]

Starcaster, reissued as the Modern Player series, is now in stock in used condition, inheriting the traditional style and incorporating specs that take playability into consideration.
Laminated maple body, alder center block, maple neck, and maple fingerboard.
It features a 9.5" radius fingerboard, medium jumbo frets, Adjusto-Matic bridge, and two Fender "Wide Range" humbucking pickups.
Between the nut and truss rod adjustment hole, you can see a mark where the paint seems to have been scraped off.
(It is hard to see in the picture due to the light, but there are some white spots.)

There are several scratches on the top of the body, slightly larger scratches on the sides of the body, and dents with peeling paint on the back of the body. There are some paint tarnish marks around the knobs (as if some solvent has been poured on them).
Some of the metal parts are rusty and dull.

However, it has been adjusted and cleaned at our repair center, so there are no problems with playing condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: CGF1323610
Year of manufacture: 2014
Country of manufacture: China
Case: Soft case
Weight: 3.75kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 22.1mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gouge removal

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Item rank B+: Some scratches, but no problem in normal use.

Serial number CGF1323610

Year of manufacture2014

Country of manufactureChina

CaseSoft case

Weight 3.75kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near the 1st fret 22.1mm

Neck thickness near 12th fret 23.2mm

Scale 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, gouge removal