USED FENDER USA / American Vintage '70s Stratocaster Rosewood Natural [06]

A U.S.-made Stratocaster that faithfully recreates the unique specifications emblematic of 1970s Fender guitars
Featuring a large headstock with a strong visual presence, a three-point neck plate engraved with an “F,” a bullet nut that can be easily adjusted from the headstock side, and the modern logo emblematic of the ’70s—this model faithfully recreates the era.
This model is also notable for its three-point joint plate and the Micro-Tilt system, which allows for adjustment of the neck angle.
This Stratocaster from the American Vintage Series remains highly popular even after production has ceased, thanks to its exceptional quality.

There is a noticeable dent and chipped/peeling paint on the 1st string horn.
There are signs of wear, including a small dent on the body back, a crack in the finish on the underside of the 1st string horn, playing wear on the pickguard, scratches around the knobs, and lifted finish next to the nut.
It has been cleaned, fully adjusted, and had its frets leveled since arrival.

Condition Grade: B+: Some minor imperfections, but no issues for normal use

Serial Number: V01699
Case: Hard case (with dirt and damage)
Accessories: Tremolo arm
Weight: 3.35 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low-String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 23.6 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, nut slot correction

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.