USED FENDER JAPAN / ST72-58US 3-Tone Sunburst [06]

We’ve just received a used Fender Japan Stratocaster “ST72-58US” made in 2004–2005!
This model recreates the 1972 specifications, featuring a large headstock, a truss rod cap with a bullet nut, and a three-point neck joint.

It’s equipped with USA Vintage pickups that faithfully reproduce the Fender vintage sound, delivering a well-balanced, clear tone.
There are dents and scratches on the top of the headstock, as well as dents on the back of the headstock and along its edges.There is a cross-shaped scratch/dent between the 3rd and 4th frets on the fingerboard, and a dent on the back of the 1st fret on the 1st-string side—though the finish has not cracked there. The top of the body has a dent accompanied by cracked finish on the 6th-string horn, chipped finish on the 1st-string horn, a dent on the elbow section, and numerous other scuffs, scratches, and scuffs on the pickguard.The body back also has a large dent next to the back cavity, a large dent at the sunburst color boundary, and other minor dents and scratches. The body sides also have scratches and dents overall, including a dent near the contour. Metal parts show noticeable scratches, scuffs, tarnish, and dirt, giving the instrument a well-used appearance.
It has been adjusted and cleaned at our repair center, and there are no issues with its playability.
* Back panel/arm missing
Condition Grade: B+: Some scratches present, but no issues for normal use

Serial Number: CIJ R058838
Case: Soft case
Weight: 3.58 kg
Truss Rod: No issues; rod movement tested up to 60 degrees left and right with no problems
Remaining Fret Life: Within normal range; frets are at a playable height
String Height (Low String Side): 2.0 mm at the 12th fret
String Height (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.6 mm
Neck thickness near the 1st fret: 21.4 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, deburring, nut slot correction, strap pin replacement

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, string action, etc., were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we do not guarantee that the measurements will be identical when the item arrives.

* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings once an item is sold, updates may not always be in real time.
We sincerely apologize and ask for your understanding in the unlikely event that the item is sold out after you place your order.