USED Fender / 1977 Stratocaster NAT/M [4.32kg/Vintage]

This 1977 Fender Stratocaster features 70s specs, large head, headtop serial, ash body with black parts.

It is 70s vintage with ash body, maple neck, approx. 41.9mm nut, Vol/2Tone/3Way selector, block saddle, F-key pegs, bullet truss rod nut & 3-point stop neck joint. Parts are kept original, and the back panel is a different color but appears to be original.

This is a good condition guitar that does not show the age of 1977, and shows signs of use (color fading, minor scratches around the body, slips and play marks, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the originally low fret board is low enough to play well. The truss rod can be tightened or loosened up to ±60 degrees.

Please read carefully.
* This item is a used item and only one of the actual item is available.
* Please note that there are scratches, dents, etc. due to use, which may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: S778564
Year of manufacture: 1977
Country of manufacture: USA
Case: Semi-hard case* Non-original
Accessories: Arm
Weight: 4.32kg
Neck Stamp: 3775
Body Stamp: 3772
Pot_Date: 1377731x3
PU_No: Front: 17 3377 / Center: 17 32** / Rear 17 3277
Truss Rod: With some caveats, I have checked the rod to 60 degrees to the left and right, and there is no problem (not much left).
Fret remaining: With caution, still can withstand cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.9mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.3mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
S778564

Year of manufacture
1977

Country of manufacture
U.S.A.

Case
Semi-hard case* Non-original

Accessories
Arm

Weight
4.32kg

Neck Stamp
3775

Body Stamp
3772

Pot_Date
1377731x3

PU_No
Front: 17 3377 / Center: 17 32** / Rear 17 3277

Truss Rod
Note: Rods have been checked up to 60 degrees to the left and right, no problem (not much left)

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
41.9mm

Neck thickness near 1st fret
22.3mm

Neck thickness near 12th fret
24.3mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
.010-.046 set

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment