USED Gibson USA / SG Special Ferrari Red (Ebony Fingerboard) [1995/3.32kg]

Ebony fretboard specs. This is a Gibson SG Special, made in 1995, featuring dot position marks, unbound neck, and open type PU.

It has mahogany body and neck, ebony fingerboard, large pickguard, 490R & 490T PU, TOM bridge and stop tailpiece.

The SG Special boasts the same hardware specs as the SG Standard of the same period except for the neck binding, position marks, and PU cover, and it is lightweight and easy to handle.

Tonex 1 has been replaced and shows signs of use (rattling/playing of pegs, chipped horn on the 1st string side, paint discoloration on the elbow, minor scratches around the body, scuffs and scratches from playing, picking marks, buckle marks, metal parts and screws are cloudy, bits and rust, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 92385335
Year of manufacture: 1995
Country of manufacture: USA
Case: Soft case
Weight: 3.27kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs & Condition

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
92385335

Year of manufacture
1995

Country of manufacture
U.S.A.

Case
Soft case

Weight
3.27kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.7mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.7mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment