USED Fender USA / The STRAT Candy Apple Red 1980-1981 Fender [5.21kg / 1980]

This Fender USA The Strat (STRAT) Rose fretboard model boasts innovative specs for its time with a 2-mode variation SW.

This model was sold as a higher-end Stratocaster model with eye-catching gold hardware. Ash body, maple neck, rose fretboard, 2 wide-range single coil PUs & X-1 in the rear, front + center/center + rear series can be selected by mode switching.
The center/center+rear series can be selected by switching the mode, and brass hardware is used.

This model boasts a wide variety of sound variations and a heavy, gutsy tone.

Refret, nut, and adjustable headstock have been replaced. Overall, the guitar shows signs of use (dents and paint chips around the head and body, scuffs and scratches, ring marks on the back of the neck, picking marks, fading, greenish-blue, fogging, bits, rust, etc. on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the slender fret board is slightly low but high enough for playing. The truss rod can be tightened or loosened up to +/- 45 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, etc. due to use, which are difficult to be shown in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: E023582
Year of manufacture: 1980-1981
Country of manufacture: USA
Case: Hard Case (missing leg hardware, chipped and bent)
Included: Arm
Weight: 5.21kg
Truss Rod: Note: I have checked the rod to 45 degrees to the left and right and it is fine (not much left)
Fretboard: note that the frets are low, but can still be cut.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.55mm
Neck thickness near 1st fret: 22.59mm
Neck thickness near 12th fret: 24.34mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL120 / .009-.042 set
Modification: Nut replaced
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
PotDate: R1378029

Specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial Number
E023582

Year of manufacture
1980-1981

Country of manufacture
U.S.A.

Case
Hard Case (missing leg hardware, chipping and deflection)

Accessories
Arm

Weight
5.21kg

Truss Rod
Note: The rod has been checked up to 45 degrees to the left and right, and there is no problem (not much left).

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
40.55mm

Neck thickness near 1st fret
22.59mm

Neck thickness near 12th fret
24.34mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL120 / .009-.042 set

Modified part
Nut replacement

Repair and Maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

PotDate
R1378029