商品情報にスキップ
1 16

USED Fender Japan / ST72-JB OWH/R [3.58kg / made from 2004 to 2006]

Serial Number : R023526

[SN R023526] USED Fender Japan / ST72-JB OWH/R [3.58kg / made from 2004 to 2006] Fender Japan [08]

Item Code: 08-2800003111226
Condition: USED
Store: [08] ikebukuro

通常価格 ¥135,200 JPY
通常価格 セール価格 ¥135,200 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
This is a Fender Japan ST72-JB, a limited production model of the "FENDER JAPAN KANDA ORDER", made around 2004.

This model is a Jeff Beck style model that was quietly listed in the "FENDER JAPAN Limited Collection" catalog. It features an alder body, 4-point neck, F-KEY pegs, and WH 3P pickguard. The PU is a USA Texas Special, and it is finished in a 70s style with a bullet truss rod cap and die-cast saddle bridge pieces.

This is an Alder/Rose spec, large head, 4 point stop, and is a model that was used by Jeff Beck in the past.

It is missing the back panel, and shows overall signs of use (color burn, multiple large dents/paint peeling around the perimeter of the body, scuffs and scratches from playing, picking marks, buckle marks, SW cracks, cloudy/pitted/rusted metal parts and screws, etc.).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: R023526
Year of manufacture: 2004-2006
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.6mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
R023526

Year of manufacture
2004-2006

Country of manufacture
Japan

Case
Soft case

Accessories
Arm

Weight
3.58kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.7mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.6mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring
「FENDER JAPAN KANDA ORDER」の限定生産モデル、フェンダー・ジャパン・ST72-JB、2004年頃製です。

”FENDER JAPAN Limited Collection”カタログにひっそりと掲載されていたJeff Beckスタイルに寄せたモデルで、アルダーボディ、4点止めネック、F-KEYペグ、WH 3Pピックガードが特徴。PUはUSA Texas Specialを搭載し、ブレットトラスロッドキャップにダイキャストサドルのブリッジ駒といった70sスタイルに仕上がっております。

アルダー/ローズ仕様でラージヘッドの4点止めといった、ジェフ・ベックの過去使用機を意識した一本です。

バックパネル欠品、全体的に使用感(色ヤケ、ボディ外周に複数の大きな打痕/塗装剥がれ、スレや弾きキズ、ピッキング痕、バックル痕、SW割れ、金属パーツやネジ類の曇り・ピッツ・サビ、等々の外観ダメージ)が見られます。

入荷時にセットアップ(クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ・フレットバリ取り)済み、フレット山は演奏に問題ない高さがあり、トラスロッドは締める方向・緩める方向調整可能で±60°まで動作確認済みです。

商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: R023526
製造年: 2004-2006
製造国: 日本
ケース: ソフトケース
付属品: アーム
重量: 3.58kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 41.7mm
ネック厚1フレット付近: 21.5mm
ネック厚12フレット付近: 24.6mm
スケール: 648mm (25.5")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ・フレットバリ取り

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
R023526

製造年
2004-2006

製造国
日本

ケース
ソフトケース

付属品
アーム

重量
3.58kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
問題なし充分なフレット高さあり

弦高低音弦側
12フレット上 2.0mm

弦高高音弦側
12フレット上 1.5mm

ナット幅
41.7mm

ネック厚1フレット付近
21.5mm

ネック厚12フレット付近
24.6mm

スケール
648mm (25.5")

RADIUS
241mm (9.5")

セットアップ時の弦
ERNIE BALL 2223 / .009-.042 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ・フレットバリ取り

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4