USED Gibson USA / ES-335 Dot Reissue Cherry [3.95kg / 1997]

Gibson ES-335 Dot Reissue, 1997.

This 50s-style ES-335 with dot inlays and short pickguard has a slim neck grip and features a figured maple/poplar laminate semi-hollow body, mahogany neck, rose fingerboard, and 57Classic PUs.

The ES-335 is a typical semi-acoustic model, with an easy-to-use slim grip, versatile 57Classic pickups, and lustrous tone.

Pegs (changed from GROVER / there are original peg marks), nut, bridge saddle (without grooves) x6, knobs x4 replacement, rod cover chipping on both tips, metal parts and screws cloudy, bits and rust, color burn, cloudy and cloudy paint overall, head and neck back and binding and F hole part, paint peeling is seen It has become a dignified look.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod has been checked to one round on the tightening side.

* This is a used item, only one of the actual item is available.
* Please note that there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B: There is a sense of use & scratches, quite, but no problem in the use to be used normally

Serial number: 91957482
Year of manufacture: 1997
Country of manufacture: USA
Case: Hard Case
Weight: 3.95kg
Truss Rod: Tightened side checked to one full turn.
Fret Depth: No problem, sufficient fret height
Nut width: 42.3mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: Pegs, nut, bridge saddle x6, knobs x4
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, fret adjustment
Other: Truss rod cover is cracked.

* Please note that this is a used instrument and there are scratches, dents, etc. that may not show up in the photos or are not shown in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
91957482

Year of manufacture
1997

Country of manufacture
United States of America

Case
Hard Case

Weight
3.95kg

Truss Rod
Checked to 1 round on the tightening side

Fret Remaining
No problem, sufficient fret height

Nut width
42.3mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
22.5mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modified parts
Pegs, nut, bridge saddle x6, knobs x4

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, fret adjustment

Other
There is a crack on the truss rod cover