USED Paul Reed Smith(PRS) / CE24 Wide Thin Neck Chrome Blue [3.55kg / made in 2006]

Paul Reed Smith (PRS) CE24 Mahogany Wide Thin neck, made in 2006.

This is the same form as the Custom24, the flagship model of PRS, with bolt-on joint, mahogany body like the Standard, maple neck with 1 11/16" Wide Thin grip with approximately 43mm nut, rose fingerboard with dot inlays, and HFS (seal removed) PU. The neck has a 1 11/16" wide thin grip with 43mm nut, Rose fingerboard with dot inlays, HFS (seal removed) & Vintage Bass PU, 5-way rotary PU selector, locking pegs, and a PRS tremolo.

It is a bolt-on joint model with a crisp sound, a thin neck/Wide Thin grip for high playability inherited from later pattern necks, and a variety of sound variations including outer-outer single, inner-outer single, and inner-outer humbucker wiring.

The strap pins have been changed to JimDunlop type (no hardware on the strap side), and the guitar shows signs of use (color burn, multiple dents on the body and peeling paint showing the underlying silver, scratches and scuffs, roughness on the back of the neck from playing, picking marks, buckle marks, cloudy/bitz/rust on metal parts and screws, etc.), The hard case is a PRS LTD hard case. The hard case is a non-original dial key case for the LTD model of PRS, and there are some tear marks and missing hardware on the bottom, but there are no problems with use.

The guitar has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut adjustment, and wiring modification) upon arrival. The fret board is high enough for playing, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: CE31352
Year of manufacture: 2006
Country of manufacture: USA
Case: Hard Case
Accessories: Arm
Weight: 3.55kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 43.01mm
Neck Thickness near 1st fret: 20.39mm
Neck thickness near 12th fret: 22.26mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut adjustment, wiring correction

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
CE31352

Year of manufacture
2006

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm

Weight
3.55kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

Nut width
43.01mm

Neck thickness near 1st fret
20.39mm

Neck thickness near 12th fret
22.26mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut adjustment, wiring correction