商品情報にスキップ
1 32

USED Gibson USA / Les Paul Standard 50s Heritage Cherry Sunburst [4.00kg/2024]

Serial Number : 204440093

[SN 204440093] USED Gibson USA / Les Paul Standard 50s Heritage Cherry Sunburst [4.00kg/2024] Gibson [08]

Item Code: 08-2800003337138
Condition: USED
Store: [08] ikebukuro

通常価格 ¥261,620 JPY
通常価格 ¥270,890 JPY セール価格 ¥261,620 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
Non weight relief body of yesteryear with 50s style neck. Gibson Les Paul Standard 50s Figured Top, made in 2024.

AA figured maple top with mahogany back, mahogany neck, rose fingerboard, Burstbucker 1 & Burstbucker 2 PUs, tapered potentiometers for audio, handwired electrical with orange drop capacitors. The PU is equipped with Burstbucker 1 and Burstbucker 2.

The Burstbucker pickups reproduce fine nuance, and the non-weight-relief body produces a tight sound with a Les Paul-like presence and tone.

It shows some signs of use (scratches, picking marks, guitar hanger marks on the head, fogging of metal parts and screws, etc.).

The guitar has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove adjustment, and saddle groove adjustment) upon arrival.

* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 204440093
Year of manufacture: 2024
Country of manufacture: USA
Case: Hard Case
Accessories: Wrench and manual
Weight: 4.00kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 43.6mm
Neck Thickness near 1st fret: 22.7mm
Neck thickness near 12th fret: 25.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut grooving correction, saddle grooving adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
204440093

Year of manufacture
2024

Country of manufacture
United States of America

Case
Hard Case

Accessories
Wrench, instruction manual

Weight
4.00kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

Nut width
43.6mm

Neck thickness near 1st fret
22.7mm

Neck thickness near 12th fret
25.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove cut correction, saddle groove cut adjustment
往年のノン・ウエイトリリーフ・ボディに50sスタイルネック。ギブソンのレスポール・スタンダード・50s・フィギュアド・トップ、2024年製です。

AAフィギュアド・メイプル・トップにマホガニー・バック、マホガニー・ネック、ローズ指板、PUはBurstbucker 1&Burstbucker 2を搭載、オーディオ用テーパー・ポテンショメーター、ハンドワイヤードの電装にはオレンジドロップ・キャパシターを採用しています。

細かなニュアンスの再現度が高いBurstbuckerピックアップとノンウエイトリリーフ・ボディによるタイトなサウンドでレスポールらしい存在感あるトーンに仕上がった一本です。

若干の使用感(スレや弾きキズ、ピッキング痕、ヘッドにギターハンガー痕、金属パーツやネジ類の曇り、等々の外観ダメージ)が見られます。

入荷時にセットアップ(クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすりあわせ・ナット溝切り修正・サドル溝切り調整)済み、フレット山は演奏に問題ない高さがあり、トラスロッドは左右60°度まで確認済みにて問題ない状態です。

* こちらの商品は中古品の現物1点限りでございます。
* 中古品につき、使用による傷・打痕等、写真に写りにくい傷がございます。予めご了承くださいませ。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: 204440093
製造年: 2024
製造国: アメリカ
ケース: ハードケース
付属品: レンチ・説明書
重量: 4.00kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
ナット幅: 43.6mm
ネック厚1フレット付近: 22.7mm
ネック厚12フレット付近: 25.0mm
スケール: 628mm (24.75")
RADIUS: 305mm (12")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすりあわせ・ナット溝切り修正・サドル溝切り調整

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
204440093

製造年
2024

製造国
アメリカ

ケース
ハードケース

付属品
レンチ・説明書

重量
4.00kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
問題なし充分なフレット高さあり

ナット幅
43.6mm

ネック厚1フレット付近
22.7mm

ネック厚12フレット付近
25.0mm

スケール
628mm (24.75")

RADIUS
305mm (12")

セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすりあわせ・ナット溝切り修正・サドル溝切り調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4