USED Gibson / 1975 Les Paul Custom Cherry Sunburst [4.57kg/1975]

1975 Les Paul Custom with engraved numbered PAFx2.

Gibson Les Paul Custom made in 1975 (AUG 13 1975 C stamped inside the front PU cavity). So-called "pancake body" has maple top/mahogany back, 3-piece mahogany neck with volute, ebony fingerboard, cruson waffle pegs, and the frets are originally slim and low type.

The rear PU cover was used with the cover removed and is in different condition than the front PU cover. The nut, which was glued out of place, has been put back in position. The pegs have different operating torques. There are some age-appropriate color tanning, cracks in the binding, multiple dents, minor scratches, and scratches.

The original jack/selector/pots have been cleaned of any galling as much as possible. The purple inner hard case has had the handle replaced and has exterior peeling.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut misalignment correction, nut groove correction, wiring correction, and gari removal) when it was first received.

* The truss rod is adjustable to tighten and loosen up to +/- 60 degrees.
* Please note that there are scratches and dents due to use, which are difficult to be seen in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 913129
Year of manufacture: 1975
Country of manufacture: USA
Case: Hard Case
Weight: 4.57kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Depth: Low
Nut Width: 42.9mm
Neck Thickness near 1st fret: 19.1mm
Neck thickness near 12th fret: 23.5mm
Scale: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut misalignment correction, nut groove correction, wiring correction, and gouge removal.

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
913129

Year of manufacture
1975

Country of manufacture
U.S.A.

Case
Hard Case

Weight
4.57kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
Low

Nut width
42.9mm

Neck thickness near 1st fret
19.1mm

Neck thickness near 12th fret
23.5mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut misalignment correction, nut groove correction, wiring correction, and gouge removal