USED Gibson Custom Shop / Pete Townshend Signature #1 '76 Les Paul Deluxe Wine Red [4.86kg]

Pete Townsend "#1" Wine Red, released in 2005 as a limited edition.

Gibson Custom Shop Pete Townsend 76 Les Paul Deluxe. This is a reissue of the "#1" with each one uniquely tweaked and numbered.

Pancake body deluxe with an additional DiMarzio DP101 in the center, and each control is
3 volume (each PU)
1 tone (master tone)
2-way toggle SW: Center PU coil tap ON/OFF
3-way toggle SW: Center PU phase in / Center PU phase out / Front & Rear PU cancel
The following is a list of the features of this product.

This model reproduces without exception the washer-fastening strap pin and large head.

It is finished with atmospheric looks and shows signs of use (color burn, weather cracks in the paint, minor scratches and bumps, scuffs and play marks, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damages).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, pot replacement x2, wiring modification) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

* The truss rod is adjustable to tighten and loosen, and the truss rod is adjustable to ±60°.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in normal use.

Serial number: PETE 047
Country of manufacture: U.S.A.
Case: Hard Case
Accessories: Certificate of Authenticity
Weight: 4.86kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
Nut width: 49.2mm
Neck Thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.2mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, pot replacement x2, wiring modification

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number PETE 047

Country of manufacture: U.S.A.

CaseHard case

AccessoriesCertificate

Weight4.86kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remaining problem, enough fret height

Nut width 49.2mm

Neck thickness 21.5mm near the 1st fret

Neck thickness 24.2mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, pot replacement x2, wiring correction