商品情報にスキップ
1 38

USED Fender / Made in Japan Traditional 70s Telecaster Thinline Maple Fingerboard Natural [2.96kg / 2020]

Serial Number : JD20015660

[SN JD20015660] USED Fender / Made in Japan Traditional 70s Telecaster Thinline Maple Fingerboard Natural [2.96kg / 2020] [08]

Item Code: 08-2800003492479
Condition: USED
Store: [08] ikebukuro

通常価格 ¥121,017 JPY
通常価格 セール価格 ¥121,017 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
This Thinline has features such as wide range humbuckers, hollow body, modern logo, bullet truss rod cap, and 3-point stop joint.

This is a Fender Made in Japan Traditional 70s Telecaster Thinline, made in 2020.

It has an ash body, maple neck, maple fingerboard, F-key pegs, Fender Wide Range Humbucking PU, and a 6-saddle String-Through-Body hardtail bridge.

Glossy and crisp hollow body & humbucker sound, easy handling, recommended for guitar & vocalists.

It shows some signs of use (scratches, playing scuffs, picking marks, fogging/bitzing of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and re-soldering) upon arrival, and the fret board is high enough to play well. The truss rod can be tightened or loosened up to ±60°.

* The truss rod is adjustable to +/- 60 degrees in the tightening and loosening directions.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: JD20015660
Year of manufacture: 2020
Country of manufacture: Japan
Case: Soft case
Weight: 2.96kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Residuals: No problem, as good as new
Nut Width: 41.71mm
Neck Thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 23.25mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD20015660

Year of manufacture
2020

Country of manufacture
Japan

Case
Soft case

Weight
2.96kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, same condition as new

Nut width
41.71mm

Neck thickness near 1st fret
22.3mm

Neck thickness near 12th fret
23.25mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
ワイドレンジハムバッカーにホローボディ、モダンロゴにブレットトラスロッドキャップ、3点止めジョイントといった特徴を持ったシンライン。

フェンダーのメイドインジャパン・トラディショナル・70s・テレキャスター・シンライン、2020年製です。

アッシュ・ボディ、メイプルネック、メイプル指板、Fキーペグ、PUはFender Wide Range Humbucking、6サドル式String-Through-Bodyハードテイルブリッジを採用しています。

艶やかでキレの良いホローボディ&ハムバッカーのサウンド、取り回しもよくギター&ボーカルの方にもオススメです。

若干の使用感(スレや弾きスジ、ピッキング痕、金属パーツやネジ類の曇り・ビッツ、等々の外観ダメージ)が見られます。

入荷時にセットアップ(クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・ハンダ付け直し)済み、フレット山は演奏に問題ない高さがあり、トラスロッドは締める方向・緩める方向調整可能で±60°まで確認済みにて問題ない状態です。

* こちらの商品は中古品の現物1点限りでございます。
* 中古品につき、使用による傷・打痕等、写真に写りにくい傷がございます。予めご了承くださいませ。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: JD20015660
製造年: 2020
製造国: 日本
ケース: ソフトケース
重量: 2.96kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし新品と同等の状態
ナット幅: 41.71mm
ネック厚1フレット付近: 22.3mm
ネック厚12フレット付近: 23.25mm
スケール: 648mm (25.5")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
JD20015660

製造年
2020

製造国
日本

ケース
ソフトケース

重量
2.96kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
問題なし新品と同等の状態

ナット幅
41.71mm

ネック厚1フレット付近
22.3mm

ネック厚12フレット付近
23.25mm

スケール
648mm (25.5")

RADIUS
241mm (9.5")

セットアップ時の弦
ERNIE BALL 2223 / .009-.042 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4