USED Fender / Vintera II 60s Telecaster Rosewood Fingerboard Fiesta Red [3.65kg / made in 2023]

The VINTERA series faithfully reproduces the style and sound of Fender's golden era, the Vintera II 60s Telecaster from Fender (Made in Mexico).

It features an alder body, Early 60s C-shape maple neck, rose fingerboard, Vintage Tall frets, 3-Saddle Vintage-Style bridge, and Vintage-Style '60s Single-Coil Tele PU.

This model has an atmospheric look and the tone of yesteryear.

It shows signs of use (scratches, marks, picking marks, fogging of metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be tightened or loosened up to ±60°.

* The truss rod is adjustable to ±60° in the tightening and loosening directions and is in good condition.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problems in normal use.

Serial number: MX23077255
Year of production: 2023
Country of manufacture: Mexico
Case: Soft case
Weight: 3.65kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 1.650" (42 mm)
Neck Thickness near 1st fret: 21.6 mm
Neck thickness near 12th fret: 25.3 mm
Scale: 25.5" (64.77 cm)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
MX23077255

Year of manufacture
2023

Country of manufacture
Mexico

Case
Soft case

Weight
3.65kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

Nut Width
1.650" (42 mm)

Neck thickness near 1st fret
21.6 mm

Neck thickness near 12th fret
25.3 mm

Scale
25.5" (64.77 cm)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment