USED Fender / Roland G-5 VG Stratocaster Black [3.93kg / 2012]

Guitar modeling by COSM is fused into a Fender Stratocaster, the G-5 VG Stratocaster, a Fender & Roland modeling guitar.

It has an alder body, maple neck, rose fretboard, 3 single type PUs, 1 divided type PU, Vol/Tone/Mode/Tuning/5-way SW, and vintage-style synchronized tremolo.

It can be used as a Stratocaster, Telecaster, humbucker, acoustic guitar, 12-string guitar, and even irregular tuning with this one guitar. It is also capable of expressing tones that cannot be achieved with conventional electric guitars, such as wide range and bright humbuckers.

There is a hole where the string guide for the 3/4 string was installed. The guitar shows signs of use (minor scratches on the back of the neck at the 1st and 2nd frets, scuffs and scratches from playing, picking marks, fogging and bits on metal parts and screws, and other exterior damage). There is no warranty due to Roland's out of support for repairs after production is complete.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be tightened or loosened up to ±60°.

* The truss rod is adjustable to ±60° in the tightening and loosening directions and is in good condition.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use
Serial number: MX12157856
Year of production: 2012
Country of manufacture: Mexico
Case: Soft case
Accessories: Arm and operation manual
Weight: 3.93kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.7mm
Neck Thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

Serial number
MX12157856

Year of manufacture
2012

Country of manufacture
Mexico

Case
Soft case

Accessories
Arm and operation manual

Weight
3.93kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

Nut width
42.7mm

Neck Thickness near 1st Fret
22.0mm

Neck thickness near 12th fret
22.7mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment