USED Fender / Classic 60s Jazz Bass Black [3.96kg/2010]

This is a Fender (Made in Mexico) Classic Series 60s Jazz Bass, reproducing the 60s specifications, produced at the Ensenada Factory in Mexico.

Alder body, C-shape maple neck, Rose fingerboard, 20F specification, Vintage-Style Single-Coil Jazz Bass pickups, 2Vol/1Tone controls, simple configuration (* poly paint).

This model follows the vintage style, and is recommended for bassists who want to step up their game, or for those who are looking for a bass for home recording purposes.

The pegs have been replaced with GOTOH pegs, the strap pins have been changed to a Shearer-compatible type, and it shows signs of use (dents around the body, scuffs and scratches from playing, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret shaping, fret adjustment, peg replacement) upon arrival. The truss rod has been checked to 60 degrees to the left and right and is in good condition.

* This is a used item and only one of the actual item is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: MX10067955
Year of manufacture: 2010
Country of manufacture: Mexico
Case: Gig bag
Weight: 3.96kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Depth: Still good for cutting, but the frets are low.
Nut Width: 38.5mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 25.1mm
Scale: 864mm (34")
Strings for setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret shaping, fret adjustment, peg replacement

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, fretboard rest, or string height is indicated, it was measured by our staff at the time of setup and may change due to the effects of climate, humidity, and other environmental differences.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number MX10067955

Year of manufacture2010

Country of manufactureMexico

CaseGig bag

Weight 3.96kg

No truss rod problem.

Fret remainderNote that the frets are still good for cutting, but the frets are low.

Nut width 38.5mm

Neck thickness 21.4mm near the 1st fret

Neck thickness 25.1mm near 12th fret

Scale 864mm (34")

Strings D'Addario EXL165 / .045-.105 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret shaping, fret grind, peg replacement