USED Fender Japan / TL52-65SPL BLD [4.63kg/1986-1987]

Fender Japan Telecaster TL52-65SPL (TL52-70SPL/ Made in Japan by Fujigen).

TL52-65SPL(TL52-70SPL) features KR's favorite 5-string specification open tuning "Micawber" style parts configuration. The model name in the catalog is "TL52-70SPL" with "TL52-65SPL" stamped in the neck/body. White ash body, maple 1P neck, button-type string guide, escutcheon-mounted DRAGSTER on the front and TL-VINTAGE on the rear, selector knob for ST, JimDunlop type strap pin, and 6-way bridge made of brass are used. Tight and tight with ash/maple.

Tight and crisp ash/maple character with H-S pickup layout and presence tone.

Lock pin hardware is missing, PG/panel/escutcheon screws have been replaced, and the dome knob is new. It shows signs of use (white discoloration around the body, scuffing and playing marks, picking marks, peeling paint at the first fret of the fingerboard and fingerboard edge, fogging, bits and rust on metal parts and screws, and other exterior damage). There is damage inside the case pocket.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and removal of burrs) when it was first received.

* The truss rod has been checked to 60 degrees to the left and right and is in good condition.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: F022465
Year of manufacture: 1986-1987
Country of manufacture: Japan
Case: Soft case
Weight: 4.63kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Fairly low, need to consider replacing next time.
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.3mm
Scale: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and removal of burrs

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number F022465

Year of manufacture 1986-1987

Country of manufacture Japan

CaseSoft case

Weight4.63kg

No truss rod problem.

Fret remainder is quite low, so it is necessary to consider replacing the frets next time it is repaired.

Nut width 42.6mm

Neck thickness: 21.5mm near the 1st fret

Neck thickness: 23.3mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and gouge removal