USED Gibson USA / SG Special Ebony [3.31kg / 2004]

This is a Gibson SG Special with a Seymour Duncan SH-4 JB in the rear position, made in 2004.

This SG Special features dot position marks, unbound neck, and open-type PU. It has mahogany body and neck, rose fingerboard, large pickguard, 490R front PU, and ABR bridge specification.

Except for the neck binding, position marks, and PU cover, the SG Special boasts the same specs as the SG Standard of the same period, and its easy handling is also attractive.

The pegs have been changed to GROVER, nut, SW knob, strap pin, thumb screw/tailpiece studs have been replaced, and overall there are some signs of use (scratches, scratches, and paint chips on the head and outer body, scratches and scuffs, picking marks, buckle marks, cloudy metal parts and screws, bits and pieces, etc.). The case has paint marks. There are paint marks on the case.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, and fret adjustment) upon arrival.

* The truss rod is adjustable to ±60° in the tightening and loosening directions and is in good condition.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 01304471
Year of manufacture: 2004
Country of manufacture: USA
Case: Gig bag
Weight: 3.31kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, fret height is sufficient.
Nut Width: 42.7mm
Neck Thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.8mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modification: Nut replaced
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut change, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number 01304471

Year of manufacture 2004

Country of manufacture USA

CaseGig bag

Weight 3.31kg

No truss rod problem.

No fret remainder problem, sufficient fret height

Nut width 42.7mm

Neck thickness 21.0mm near the 1st fret

Neck thickness 24.8mm near 12th fret

Scale 628mm (24.75")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Modified partNut replacement

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut change, fret adjustment