USED Fender / Made in Japan Hybrid II Telecaster Rosewood Fingerboard Modena Red [3.30kg / made in 2022]

This is a Fender Made in Japan Hybrid II Telecaster with Rose fretboard, made in 2022.

This series is aptly called "Hybrid" with modern specs such as 4-point PU selector, locking pegs, and back contour. It features an alder body, satin-finished maple C-shape neck, narrow-tall 22 frets, Hybrid II Custom Voiced Single Coil Telecaster PU, and a bridge with slanted brass saddles.

It has a 4-way PU selector including series/parallel, back contour for improved fit, locking pegs, and narrow-tall frets for high playability.

The strap pins have been changed to shear type, and the guitar shows some signs of use (scratches, playing marks, picking marks, paint fading along the wood grain, fogging of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD22028176
Year of manufacture: 2022
Country of manufacture: Japan
Case: Gig bag
Accessories: Lock pin hardware
Weight: 3.30kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
Nut width: 42.2mm
Neck Thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number JD22028176

Year of manufacture 2022

Country of manufacture Japan

CaseGig bag

AccessoriesLock pin hardware

Weight3.30kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remaining problem, enough fret height

Nut width 42.2mm

Neck thickness 21.1mm near 1st fret

Neck thickness 24.1mm near 12th fret

Scale 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment