USED Greco / Super Sound Series SE-500 Natural [10]

Made in 1979. A used ST model from the long-established Japanese brand Greco has arrived!
The body is made of SEN WOOD—which has long been referred to as “Japanese Ash” and used as a substitute due to its appearance and tonal characteristics resembling those of ash—and features a bolt-on one-piece maple neck with just the right thickness for a comfortable grip. The result is a sound with a quick attack and great projection.
Upon arrival, the back panel was missing, and the strap pin on the horn side had been replaced. The frets are significantly worn, with only about 40% of the original material remaining. As a result, you may experience some muffled tones or buzzing when performing bends in the higher positions. We apologize for any inconvenience and ask for your understanding in advance.Overall, there are signs of wear and use, including dents, paint discoloration, and sticker residue on the front of the body. Additionally, there are scattered signs of damage, such as aftermarket screw holes on the back of the body, a gap in the paint at the neck joint, and paint peeling on the fingerboard surface; however, these do not currently affect playability. The bridge plate shows slight warping, and the hardware exhibits signs of aging such as dullness and rust, but there are currently no functional issues.

Condition Grade: B: Shows significant scratches and signs of wear, but functions perfectly for normal use

Serial Number: A791512
Year of Manufacture: 1979
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.49 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Height: Note: While the frets can still withstand filing, they are on the low side
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 21.9 mm
Neck thickness near the 12th fret: 23.2 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Back panel missing. Strap pin on the horn side replaced.
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, and deburring

* As this is a used item, please be aware that there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here.

* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.