USED KRAMER / LK-1 Black [11]

A representative of HR & HM guitars!
The distinctive banana head is one of the iconic designs of HR & HM guitars of the 80s and 90s.
Floyd Rose bridge, mini switch pickup selector, one volume and simple controls are also one of the features.

There are some paint chips on the cutaway and near the output jack.
There are scratches, dents, dull parts, rust, and other signs of use.
The neck is a little wavy, but it has been set up and is in playing condition.

Serial number: 52618
Case: Non-authentic soft case
Weight: 3.62kg
Truss Rod: Note: Checked up to 60 degrees left and right (slightly wavy).
Fret Remaining: Note: Still can be cut, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 24.4mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Serial No.
52618

Case
Non-genuine soft case

Weight
3.62kg

Truss Rod
No problem (slight waviness)

Remaining frets
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.4mm

Neck thickness near 1st fret
19.9mm

Neck thickness near 12th fret
24.4mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing