USED FERNANDES / FSA-60 Brown Sunburst [11]

Stone logo period, plain top semi-acoustic model!
This model is from the late 70's to early 80's stone logo period. The body is maple, the neck is also maple 3pcs, and the nut width is about 41mm. The truss rod cover has been changed to a 3-point fastener, and there are traces of gluing on the back side in the past. Each control knob has also been replaced, and the pickguard is missing.
There are scratches, dents, peeling paint, dull parts, rust, and other signs of use.
The neck is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 451002
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.87kg
Truss Rod: Note: Rod loosened and cut off, no problem with the neck.
Fret Remaining: Note: Still can be cut, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.2mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
451002

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.87kg

Truss Rod
Note: There is no problem with the neck at present due to the rod being loosened and cut off.

Leftover frets
There is a note that the frets are low, although they still stand up to cutting.

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.2mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment