USED G&L / ASAT 1989 Natural [11]

G&L ASAT made in 1989 with "By Leo Fender" lettering on the head.
It looks like an evolution of Fender's Telecaster. This model was finished with excellent craftsmanship.
The vintage tone produced by G&L's original single coil pickups and the aged body has a unique withered feel that creates a very nice atmosphere.
Natural finish and 1-ply pickguard make this a must-have for enthusiasts.

There is a small crack on the neck joint. There is a ding on the head.
There is a paint crack on the body side. There is a ding on the edge of the body that reaches the wood.
Overall, there are scratches, dents, and rust on the metal, and the guitar shows signs of use.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: G026162
Year of manufacture: 1989
Country of manufacture: USA
Case: Original hard case
Weight: 3.94kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.6mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and groove adjustment, fixing of sticking torsion screws, installation of 4th string saddle screw and spring, nut groove correction on 6th and 5th strings

Specs & Condition

Item rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
G026162

Year of manufacture
1989

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.94kg

Truss Rod
No problem, confirmed to 60 degrees left and right

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.6mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fixing sticking imo screws, installing saddle screws and spring on the 4th string, fixing nut groove on the 6th and 5th strings